• PIN CODES
The PIN (Personal Identity Number) and PIN2 codes are 4- to 8-digit
numbers that usually come from your service provider along with the SIM
card. Use the PIN code to protect your phone and SIM card against
unauthorized use. The PIN2 code activates some of your phone’s functions,
such as Call cost limit. See “Manage call costs” on page 52.
When the phone requires the PIN or PIN2 code, it displays Enter PIN code:
or Enter PIN2 code:.
Enter the code then press OK.
Set PIN code request
You can activate the PIN code request to prevent unauthorized use of your
phone. If you set the PIN code request to On, your phone will ask for the
code each time you turn the phone on.
Note: When the phone is locked, calls may be possible to the
emergency number programmed into your phone (for example,
911 or other official emergency number).
1
Press Menu 4 7 1 (Settings > Security settings> PIN code request).
2
Enter the PIN code supplied by your service provider, and press OK.
3
Scroll to On and press OK.
To turn off this feature, repeat steps 1 through 3 above, but select Off in
step 3.
Change your PIN or PIN2 code
You can change your PIN or PIN2 code to any 4- to 8-digit number.
Tip: Activate the PIN code request first.
1
Press Menu 4 7 6 (Settings > Security settings > Change access
codes).
2
Scroll to Change PIN code, then press Select.
13
[ 90 ]
3
Enter the current PIN code and press OK.
4
Enter the new PIN code and press OK.
5
Enter the new PIN code again to verify, and press OK.
Note: If you make a mistake while entering the code, Code Error
appears. Start again at step 2 and be careful to enter the correct
code. If you enter the wrong code three times in a row, the PIN code
is blocked. To unblock the PIN code, you need a Personal Unblocking
Key (PUK) from your service provider.